UV Masking Resins

CM Mask Peelable Grade 7CM MASK® – UV CURABLE MASKING RESINS simplify the masking process prior to surface preparation & finishing operations. Formulated to have no effect on alloys, UV resins cure in seconds upon exposure to UV light; offer increased productivity, lower masking costs, and enhanced worker & environmental safety. Advanced formulation UV Masking Resins are easy to apply and leave no residue. Industries include aerospace, medical devices & metal finishing. Resins hold up to grit blasting, plating, acid stripping, and shot peening. UV Masking ArticleAvailable in Peelable & Burn-Off Grades: 

 

PEELABLE UV MASKING RESIN GRADES

  • Lower adhesion grades have easy manual peel off
  • Higher adhesion grade peels off easily after warm water soak
  • Plating grade is plating solution resistant, peels off easily after warm water rinse
  • Spray, brush or dip to apply; leaves no residue

CM Mask 2-102
Peelable Masking Resin provides excellent surface protection during aggressive surface finishing operations such as plating, anodizing, grit blasting, air plasma spraying, acid stripping, media blasting, shot peening and polishing. This flexible, high adhesion masking resin is ideal for protecting steel, aluminum, titanium, cobalt and other commonly used metals in the aerospace and medical implant industries. CM Mask 2-102 contains no nonreactive solvents and quickly cures when exposed to UV light. After processing, it is easily removed by peeling after a short hot water soak at 85°C (185°F). TECHNICAL DATA SHEET

CM Mask 2-104  
Peelable Masking Resin provides excellent surface protection of rough or porous components during mild to moderate surface finishing processes such as grit blasting, shot peening and polishing. This flexible, high adhesion UV curable masking resin is ideal for protecting steel, aluminum, titanium, cobalt, and other commonly used metals in the aerospace, medical implant and metal finishing industries. CM Mask 2-104 contains no nonreactive solvents and quickly cures when exposed to UV light. After processing, it is easily removed by peeling. TECHNICAL DATA SHEET

CM Mask 2-107 
Peelable Masking Resin provides excellent surface protection during moderate to aggressive surface finishing operations such as grit blasting, shot peening, polishing and acid stripping. This flexible, high adhesion masking resin is ideal for protecting steel, aluminum, titanium, cobalt, nickel and other commonly used metals in the aerospace and medical implant industries. CM Mask 2-107 contains no nonreactive solvents and quickly cures when exposed to UV light. After processing, it is easily removed by peeling after a short hot water soak at at 50°C (122°F). TECHNICAL DATA SHEET

BURN-OFF UV MASKING RESIN GRADES

  • High adhesion; resists HCI and other acids/alkalis
  • Cures to 1/4″ deep; tough, translucent bonds
  • Machines & abrades cleanly, leaves no residue
  • Cooling Cavity Sealant
  • Available with hard, clear and glossy bonds
  • Non-slumping resin
  • Applications where heat cure is not practical

CM Mask 2-101 
Burn-Off Masking Resin provides excellent surface protection during aggressive turbine component processes such as Air Plasma Spray coatings, acid stripping, and machining. This hard, high adhesion mask is ideal for protecting nickel based alloys commonly used in the manufacturing of hot engine components such as blades, vanes, rotors, transitions, etc. CM Mask 2-101 contains no nonreactive solvents and cures quickly when exposed to UV light. After processing, it is easily removed by incineration at temperatures above 650°C (1200°F). TECHNICAL DATA SHEET

CM Mask 2-105
Burn-Off Masking Resin provides excellent surface protection during aggressive turbine component processes such as Air Plasma Spray coatings, acid stripping, and machining. This hard, high adhesion mask is ideal for protecting nickel based alloys commonly used in the manufacturing of hot engine components such as blades, vanes, rotors, transitions, etc. CM Mask 2-105 contains no nonreactive solvents and cures quickly when exposed to UV light. After processing, it is easily removed by incineration at temperatures above 650°C (1200°F). TECHNICAL DATA SHEET

MASKING TECHNICAL ARTICLE

Contact us for assistance in selecting the UV Curable Masking Resin for your operation at 800-262-7763.